Name: RING & BALL APPARATUS
Code: 11048-00
Description: AS PER IS:1205 & 354: Used for the determination of softening point of Bituminus compound etc.Complete for two test with hand stirrer but without thermometer
Code: 11048-00
Description: AS PER IS:1205 & 354: Used for the determination of softening point of Bituminus compound etc.Complete for two test with hand stirrer but without thermometer
Name: HOT PLATE
Code: 12001-02
Description: Made of cast iron and mild steel machine finish top and side hammerton spray painted, Operation on 220/230V A.C. Mains with plug top and chord. Control Pannel is provided separately to avoid damages from Heat & Spilleage of liquid samples.
Code: 12001-02
Description: Made of cast iron and mild steel machine finish top and side hammerton spray painted, Operation on 220/230V A.C. Mains with plug top and chord. Control Pannel is provided separately to avoid damages from Heat & Spilleage of liquid samples.
Name: DRYING OVENS
Code: 12004
Description: Drying Ovens, Temperature Range: From 50°C To 250°C, Operation On 230v 50-60hz. Single Phase, Ac Mains, Or 110v 50-60hz. Single Phase On Request.
Code: 12004
Description: Drying Ovens, Temperature Range: From 50°C To 250°C, Operation On 230v 50-60hz. Single Phase, Ac Mains, Or 110v 50-60hz. Single Phase On Request.
Name: TIC INFRARED MOISTURE BALANCE
Code: 16001
Description: Infrared Moisture Balance, The Balance Is Calibrated In Terms Of Moisture Percentage 0 - 100% And Is Read Directly On The Instrument. Measuring Range : 0 To 100%, Accuracy : + 0.2%,
Code: 16001
Description: Infrared Moisture Balance, The Balance Is Calibrated In Terms Of Moisture Percentage 0 - 100% And Is Read Directly On The Instrument. Measuring Range : 0 To 100%, Accuracy : + 0.2%,
Name: PRISMATIC COMPASS WITH TRIPOD
Code: 18
Description: PRISMATIC COMPASS WITH TRIPOD, Made of Brass circular casing with 12cm dia. least count 30min. Vernier scale and prism for angle reading, with aluminium tripod.
Code: 18
Description: PRISMATIC COMPASS WITH TRIPOD, Made of Brass circular casing with 12cm dia. least count 30min. Vernier scale and prism for angle reading, with aluminium tripod.
Name: BRUTON COMPASS (BRASS)
Code: 18000-00
Description: BRUTON COMPASS (BRASS), Least count ½˚ (30min.)graduated circle with ½ Azimuth reading on both 0-360˚and quadrant graduated markings round level and long level for azimuth & inclination measurement vernier scale with long level for inclination measurement.
Code: 18000-00
Description: BRUTON COMPASS (BRASS), Least count ½˚ (30min.)graduated circle with ½ Azimuth reading on both 0-360˚and quadrant graduated markings round level and long level for azimuth & inclination measurement vernier scale with long level for inclination measurement.
Name: METAL TRAYS
Code: 18003
Description: METAL TRAYS, Metal Tray made of GI sheet powder coated / painted 30cm square with 10cm hole in center.
Code: 18003
Description: METAL TRAYS, Metal Tray made of GI sheet powder coated / painted 30cm square with 10cm hole in center.
Name: LABORATORY CONCRETE MIXER
Code: 18012
Description: LABORATORY CONCRETE MIXER, Mixing Capacity : 40 ltrs. (approx.). Overall Dimension : 910mm X 875 mm X 1250mm. Suitable for operation on 440V, 50Hz, Three Phase, AC supply.
Code: 18012
Description: LABORATORY CONCRETE MIXER, Mixing Capacity : 40 ltrs. (approx.). Overall Dimension : 910mm X 875 mm X 1250mm. Suitable for operation on 440V, 50Hz, Three Phase, AC supply.
Name: POST HOLE / SCREW AUGERS
Code: 18015-00
Description: POST HOLE / SCREW AUGERS, Post Hole Augers complete with one meter pipe & T piece. Screw Augers complete with one meter pipe & Handle
Code: 18015-00
Description: POST HOLE / SCREW AUGERS, Post Hole Augers complete with one meter pipe & T piece. Screw Augers complete with one meter pipe & Handle
Name: COMPACTION FACTOR APPARATUS
Code: 18017
Description: COMPACTION FACTOR APPARATUS, As Per IS:5515-1983, For determining the workability of concrete provided the maximum size of aggregate does not exceed 38mm.
Code: 18017
Description: COMPACTION FACTOR APPARATUS, As Per IS:5515-1983, For determining the workability of concrete provided the maximum size of aggregate does not exceed 38mm.